2010 Chevrolet Silverado 1500 Regular Cab Owner's Manual - Page 499

The vehicle should: . To adjust the vertical aim: 1. Open the hood. See Hood Release on page 6‑15 for more information. Be placed so the headlamps are 25 ft. (7.6 m) from a light colored wall. Have all four tires on a level surface which is level all the way to the wall. Be placed so it is perpendicular to the wall. Not have any snow, ice, or mud on it. Be fully assembled and all other work stopped while headlamp aiming is being performed. Be normally loaded with a full tank of fuel and one person or 160 lbs (75 kg) sitting on the driver seat. Have tires properly inflated. Have the spare tire is in its proper location in the vehicle. . ... . . . Headlamp aiming is done with the vehicle's low-beam headlamps. The high-beam headlamps will be correctly aimed if the low-beam headlamps are aimed properly. 2. Locate the aim dot on the lens of the low‐beam headlamp. 3. Record the distance from the ground to the aim dot on the low‐beam headlamp. 6-55