2010 Chevrolet Silverado 1500 Regular Cab Owner's Manual - Page 97

Notice: Do not let the LATCH attachments rub against the vehicle's safety belts. This may damage these parts. If necessary, move buckled safety belts to avoid rubbing the LATCH attachments. Do not fold the empty rear seat with a safety belt buckled. This could damage the safety belt or the seat. Unbuckle and return the safety belt to its stowed position, before folding the seat. 1. 4. Route, attach, and tighten the top tether according to your child restraint instructions and the following instructions: If the position you are using has an adjustable headrest or head restraint and you are using a dual tether, route the tether around the headrest or head restraint . Regular Cab Models 1. If the child restraint manufacturer recommends that the top tether be attached, attach and tighten the top tether to the top tether anchor, if your vehicle has one. Refer to the child restraint instructions and the following steps: 1. 1. Pull the passenger seatback forward by pulling the recliner handle upward to access the top tether anchor. See Reclining Seatbacks on page 2‑10 for additional information. 1. 2. Find the top tether anchor. 1. 3. Remove the cover to expose the anchor. If the position you are using has an adjustable headrest or head restraint and you are using a single tether, raise the headrest or head restraint and route the tether under the headrest or head restraint and in between the headrest or head restraint posts. 2-55