2015 Chevrolet Spark Owner Manual - Page 248

Vehicle Care 10-25 Headlamps, Front Turn Signal and Parking Lamps High/Low-Beam Headlamp To replace a headlamp bulb: 1. Open the hood. See Hood on page 10-4. 2. Remove the connector retaining tab (1). 3. Disconnect the wiring harness connector from the bulb (3) by pressing the connector release (2) and pulling straight back. 4. Remove the bulb (3) from the headlamp assembly by turning counterclockwise and pulling straight back. 5. Install the new bulb in the headlamp assembly by turning clockwise. Front Turn Signal/Parking Lamps To replace a front turn signal bulb: 1. Open the hood. See Hood on page 10-4. 1. Connector Retaining Tab 2. Connector Release 3. Headlamp Bulb 6. Install the wiring harness connector to the bulb. Be sure the connector release (2) locks into place. 7. Install the connector retaining tab (1). 2. Turn the bulb socket counterclockwise and pull it out of the lamp housing. 3. Pull the bulb straight out of the bulb socket. 4. Install the new bulb into the socket by pressing it in.