2015 Chevrolet Spark Owner Manual - Page 249

10-26 Vehicle Care 5. Install the socket into the lamp housing by turning it clockwise. Fog Lamps To replace the front fog lamp bulb: 1. Locate the fog lamp under the front fascia. 2. Disconnect the electrical connector from the fog lamp bulb assembly. 3. Remove the bulb by turning it counterclockwise and pulling it straight out of the assembly. 4. Install the new bulb by turning it clockwise into the assembly. 5. Reverse Steps 1-3 to reinstall. Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps 2. Remove the two screws and the lamp assembly. 3. Turn the bulb socket counterclockwise and remove the socket. 4. Press the bulb in and turn counterclockwise to remove it from the socket. 5. Press the new bulb in and turn clockwise to install the bulb into the socket. 1. Stoplamp/Taillamp 2. Turn Signal Lamp/Taillamp 3. Back-up Lamp To replace a taillamp, turn signal lamp, stoplamp, or back-up bulb: 1. Open the liftgate. See Liftgate on page 2-8.