2015 Chevrolet Spark Owner Manual - Page 284

Vehicle Care Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured) The kit includes: 10-61 2. Remove the air only hose (10) and the power plug (9) from the bottom of the compressor. 3. Place the compressor on the ground near the flat tire. Make sure the tire valve stem is positioned close to the ground so the hose will reach it. 4. Remove the valve stem cap from the flat tire by turning it counterclockwise. 5. Attach the air only hose (10) to the tire valve stem by turning it clockwise until tight. 8. Pressure Deflation Button 9. Power Plug 10. Air Only Hose 1. 2. 3. 4. 5. 6. 7. Sealant Canister Inlet Valve Sealant/Air Hose Base of Sealant Canister Tire Sealant Canister On/Off Button Slot on Top of Compressor Pressure Gauge If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning flashers. See Hazard Warning Flashers on page 6-3. See If a Tire Goes Flat on page 10-54 for other important safety warnings. 1. Remove the compressor from its storage location. See Storing the Tire Sealant and Compressor Kit on page 10-63.