2015 Chevrolet Spark Owner Manual - Page 83
2015 Chevrolet Spark Manual
Page 83 highlights
3-44 Seats and Restraints If the rear outboard seating position you are using has an adjustable head restraint and you are using a single tether, raise the head restraint and route the tether under the head restraint and in between the head restraint posts. 3. Before placing a child in the child restraint, make sure it is securely held in place. To check, grasp the child restraint at the LATCH path and attempt to move it side to side and back and forth. There should be no more than 2.5 cm (1 in) of movement for proper installation. Head Restraint Removal and Reinstallation The rear outboard head restraints can be removed if they interfere with the proper installation of the child restraint. To remove the head restraint: If the rear outboard seating position you are using has an adjustable head restraint and you are using a dual tether, raise the head restraint and route the tether under the head restraint and around the head restraint posts. 1. Partially fold the seatback forward. See Rear Seats on page 3-6 for additional information. 2. Press both buttons on the head restraint posts at the same time, and pull up on the head restraint. 3. Store the head restraint in the cargo area of the vehicle inside the cargo net. 4. When the child restraint is removed, reinstall the head restraint before the seating position is used.