2008 Chrysler Crossfire Owner Manual - Page 100

98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE For nighttime driving, the exterior lights switch should be in the low beam position to permit activation of the high beam headlights. Fog Lights (If Equipped) To operate the fog lights, pull the headlight switch out one stop, with the parking lights and/or low beam headlights on. A light to the lower left of the headlight switch will illuminate when the fog lights are on. To turn off the fog lights, push the headlight switch in fully. Selecting high beam headlights will also turn off the fog lights. Standing Lights When the vehicle is parked on the street, the standing lights (left or right side parking lights) can be turned on, making your vehicle more visible to passing vehicles. To operate the standing lights, turn the headlight switch counterclockwise one stop (right lamps) or two stops (left lamps) from the OFF position. To turn off the standing lights, return the headlight switch to the OFF position. The standing lights cannot be operated when the ignition switch is in the ON/RUN position. CAUTION! Standing lamps are intended for short term use when parking. If these lights are left on for a long period of time, your car's battery may drain, causing a possible starting problem. Assure that the headlamp switch is in the OFF position when leaving the vehicle.