2008 Chrysler Crossfire Owner Manual - Page 140
2008 Chrysler Crossfire Manual
Page 140 highlights
138 UNDERSTANDING YOUR INSTRUMENT PANEL There are two symbols which will appear in the main odometer display field prior to the next suggested service. This symbol represents Service A. This second symbol represents Service B. 2. Within one second press the knob/button twice. 3. The present status for days or distance is displayed. Within 10 seconds turn the key to OFF/LOCK. 4. Press and hold the knob/button, while turning the key to ON/RUN again. The present status for days or distance is displayed once more. Continue to hold the knob/button. After approximately 10 seconds, a signal sounds and the display shows 7,000 mi (Canada: 11 000 km) for approximately 10 seconds. 5. Release the knob/button. If the FSS counter was inadvertently reset, have an authorized dealer correct it. The message is displayed for approximately 10 seconds when turning the key to the ON/RUN position, or while Depending on operating conditions throughout the year, the next service is calculated and displayed next to this symbol in days remaining before the next service is required. Likewise, the next service may be calculated and displayed next to this symbol as distance remaining before the next service is required. The counter can also be reset by any individual after the indicated service has been performed. To do so: 1. Turn key to the ON/RUN position.