2008 Chrysler Crossfire Owner Manual - Page 309
2008 Chrysler Crossfire Manual
Page 309 highlights
MAINTAINING YOUR VEHICLE 307 CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. Front Turn Signal and Parking/Standing Lights • Twist the bulb socket counterclockwise and pull out. Push the bulb into the socket, turn counterclockwise and remove. • Replace the bulb, push in and twist clockwise. Reinstall the socket, and turn clockwise. Front and Rear Sidemarker Lights 1. Push the front sidemarker assembly in and slide it forward. Push the rear sidemarker assembly in and slide rearward. The assembly will release from the fascia. 2. Twist the bulb socket counterclockwise and pull out. Push the bulb into the socket, turn counterclockwise and remove. 3. Replace the light, push in and twist clockwise. 7