2008 Chrysler Crossfire Owner Manual - Page 15
2008 Chrysler Crossfire Manual
Page 15 highlights
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 NOTE: If the key in the ignition switch is in the ON/RUN position, the vehicle cannot be locked or unlocked with the remote control. When you lock the vehicle, both door lock buttons should move down. If either one stays up, the respective door is not properly closed. You should then unlock the vehicle, open and close the door, and lock the vehicle again. Each individual door can be locked with the respective door lock button - the driver's door can only be locked when it is closed. If the vehicle has previously been locked from the outside, only the door being opened from the inside will unlock, and the alarm will come on. The other door, the rear liftgate/decklid, fuel filler door, and center console (roadster only) will remain locked. NOTE: In case of a malfunction in the central locking system, the doors can be locked and unlocked individually. To lock, turn the key in the driver's door lock 2 The doors can be unlocked by pulling on the inside door handle, pressing and releasing the top portion of the central locking switch located in the console, or by pressing and releasing the UNLOCK transmit button on the key Fob. Both doors can also be unlocked by turning the key counterclockwise in the driver's door.