2008 Chrysler Crossfire Owner Manual - Page 121

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 WARNING! Your motorized door or gate will open and close while you are programming the universal transceiver. Do not program the transceiver if people or pets are in the path of the door or gate. A moving door or gate can cause serious injury or death to people and pets or damage to objects. 2. Turn the ignition to the ON/RUN position. 3. Erase the factory test codes by pressing the two outside buttons. Release the buttons when the light in the overhead console display begins to flash (about 20 seconds). NOTE: Step 3 does not have to be followed to program additional hand-held transmitters. 4. Choose one of the three buttons to program. Place the hand-held controller 1-3 in (25-76 mm) from the universal transceiver while keeping its indicator light in view. 3 5. Using both hands, press the hand-held transmitter button and the desired universal transceiver button. Do not release the buttons until Step 6 has been completed.