2008 Chrysler Sebring Owner Manual Convertible - Page 255

STARTING AND OPERATING 255 ENGINE BLOCK HEATER - IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather. Connect the cord to a standard 110-115 volt AC electrical outlet with a grounded, three-wire extension cord. The engine block heater cord is bundled under the hood between the headlight assembly and the Totally Integrated Power Module (Fuse Box) on the driver side of the vehicle. AUTOMATIC TRANSAXLE CAUTION! Damage to the transaxle may occur if the following precautions are not observed: • Shift the gear selector lever into PARK only after the vehicle has come to a complete stop. • Shift the gear selector lever into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift the gear selector lever from REVERSE, PARK, or NEUTRAL into any forward gear when the engine is above idle speed. • Before shifting the gear selector lever into any gear, make sure your foot is firmly on the brake pedal. NOTE: You MUST press and hold the brake pedal down while shifting the gear selector lever out of PARK. 5 WARNING! Remember to disconnect the cord before driving. Damage to the 110-115 volt electrical cord could cause electrocution.