2008 Dodge Ram 2500 Pickup Owner Manual Diesel - Page 155

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 WARNING! Vehicle exhaust contains carbon monoxide, a dangerous gas. Do not run your vehicle in the garage while training the transceiver. Exhaust gas can cause serious injury or death. Programming HomeLinkா Before You Begin If you have not trained any of the HomeLink௡ buttons, erase all channels before you begin training. To do this, press and hold the two outside buttons for 20 seconds. The EVIC will display "CLEARING CHANNELS." Release the buttons when the EVIC message states "CHANNELS CLEARED." It is recommended that a new battery be placed in the hand-held transmitter of the device being programmed to HomeLink௡ for more efficient training and accurate transmission of the radio-frequency signal. Your vehicle should be parked outside of the garage while training. 1. Turn the ignition switch to the ON/RUN position. 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) from the HomeLink௡ buttons while keeping the EVIC display in view. For optimal training, point the battery end of the handheld transmitter away from the HomeLink௡. 3. Simultaneously, press and hold both the chosen HomeLink௡ button and the hand-held transmitter button until the EVIC display changes from "CHANNEL # TRAINING" to "CHANNEL # TRAINED." 3