2008 Dodge Ram 2500 Pickup Owner Manual Diesel - Page 345
2008 Dodge Ram 2500 Pickup Manual
Page 345 highlights
STARTING AND OPERATING 343 Tire Pressure Information label. The Supplemental Tire Pressure Information label is located on the rear face of the driver door. Use an accurate tire gauge to check the tire pressures when lowering all four tire pressures. After all four tire pressures have been lowered to the Light Load inflation pressures, press the "Light Load" reset switch. If the "Light Load" switch's amber colored LED turns ON, the TPMS is using the light load inflation pressure (cold) low pressure warning thresholds. If the "Light Load" reset switch amber colored LED flashes on and off for 10 seconds, after all four tire pressures have been lowered to the Light Load inflation pressures, the pressure in any one of the four tires may not be at the light load inflation pressure (cold) values as indicated for the Light Load condition as defined on the Supplemental Tire Pressure Information label located on the rear face of the driver door. Using an accurate tire pressure gauge, re-check the tire pressures for the light load inflation pressure (cold) value. 5 Example Supplemental Tire Pressure Label To switch from the max load inflation pressure (cold) low pressure warning threshold to the light load inflation pressure (cold) low pressure warning threshold, begin by placing the ignition switch in the RUN position. Next, lower all four road tire pressures to the Light Load Inflation Pressure values as listed on the Supplemental