2010 Dodge Avenger Owner Manual - Page 160

UNDERSTANDING YOUR INSTRUMENT PANEL 159 22. Electronic Stability Control (ESC) Activation/ Malfunction Indicator Light - If Equipped The "ESC Activation/Malfunction Indicator Light" in the instrument cluster will come on when the ignition switch is turned to the ON position. It should go out with the engine running. If the "ESC Activation/Malfunction Indicator Light" comes on continuously with the engine running, a malfunction has been detected in the ESC system. If this light remains on after several ignition cycles, and the vehicle has been driven several miles (kilometers) at speeds greater than 30 mph (48 km/h), see your authorized dealer as soon as possible to have the problem diagnosed and corrected. • Each time the ignition is turned ON, the ESC system will be ON even if it was turned off previously. • The ESC system will make buzzing or clicking sounds when it is active. This is normal; the sounds will stop when ESC becomes inactive following the maneuver that caused the ESC activation. 23. Front Fog Light Indicator - If Equipped This indicator will illuminate when the front fog lights are on. 4 24. Tire Pressure Monitoring Telltale Light Each tire, including the spare (if provided), should be checked monthly, when cold and inflated to the inflation pressure recommended NOTE: by the vehicle manufacturer on the vehicle • The "ESC Off Indicator Light" and the "ESC placard or tire inflation pressure label. (If your vehicle Activation/Malfunction Indicator Light" come on mo- has tires of a different size than the size indicated on the mentarily each time the ignition switch is turned ON.