2010 Dodge Avenger Owner Manual - Page 389

388 MAINTAINING YOUR VEHICLE CAUTION! • When installing the Totally Integrated Power Module cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Totally Integrated Power Module, and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload. If a properly rated fuse continues to blow, it indicates a problem in the circuit that must be corrected. • Disengage the mini-fuse in the Power Distribution Center labeled IOD (Ignition Off-Draw). • Disconnect the negative cable from the battery. REPLACEMENT BULBS All the inside bulbs are brass or glass wedge base. Aluminum base bulbs are not approved and should not be used for replacement. LIGHT BULBS - Interior Bulb No. Front Courtesy/Reading Lamp ...578/W5W Center Courtesy/Reading Lamp ...578/W5W Visor Vanity Lamp ...A6220 Glove Box Lamp ...A6220 Shift Indicator Lamp ...IKLE14140 Rear Compartment (Trunk) Lamp ...579 VEHICLE STORAGE NOTE: For lighted switches, see your authorized dealer If you will not be using your vehicle for more than for replacement. 21 days, you may want to take steps to preserve your battery.