2010 Dodge Avenger Owner Manual - Page 364
2010 Dodge Avenger Manual
Page 364 highlights
MAINTAINING YOUR VEHICLE 363 quiet, easy operation and to protect against rust and wear. Prior to the application of any lubricant, the parts concerned should be wiped clean to remove dust and grit; after lubricating excess oil and grease should be removed. Particular attention should also be given to hood latching components to ensure proper function. When performing other underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated. mild non-abrasive cleaner or use the washer solvent. This will remove accumulations of salt, waxes, or road film and help reduce streaking and smearing. Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. Avoid using the wiper blades to remove frost or ice from the windshield. Make sure that they are not frozen to the The external lock cylinders should be lubricated twice a glass before turning them on to avoid damaging the year, preferably in the Fall and Spring. Apply a small blade. amount of a high quality lubricant, such as MOPAR Lock Cylinder Lubricant or equivalent directly into the Keep the blade rubber out of contact with petroleum products such as engine oil, gasoline, etc. lock cylinder. Windshield Wiper Blades NOTE: Life expectancy of wiper blades varies dependClean the rubber edges of the wiper blades and the ing on geographical area and frequency of use. Poor windshield periodically with a sponge or soft cloth and a performance of blades may be present with chattering, marks, water lines or wet spots. If any condition is 7