2000 Ford Expedition Owner's Manual - Page 218
2000 Ford Expedition Manual
Page 218 highlights
Maintenance and care 3. Carefully pry the lamp assembly away from the vehicle to expose the bulb sockets. 4. Rotate the bulb socket counterclockwise and remove from lamp assembly. 5. Pull bulb straight out of socket and push in the new bulb. 6. Install the bulb socket into the lamp assembly and rotate clockwise. 7. Carefully install the tail lamp assembly on the vehicle snapping the three retaining tabs into place. 8. Secure the lamp assembly with two screws. Replacing foglamp bulbs 1. Remove the bulb socket from the foglamp by turning counterclockwise. 2. Disconnect the electrical connector from the foglamp bulb. 3. Connect the new foglamp bulb to the electrical connector. 4. Install the bulb socket in the foglamp turning clockwise. Replacing running board lamp bulbs For bulb replacement, see a dealer or qualified technician. High-mount brakelamp To change the high-mount brakelamp bulbs: 1. Remove the four screws from the high-mount brakelamp assembly. 218