2000 Ford Expedition Owner's Manual - Page 89
2000 Ford Expedition Manual
Page 89 highlights
Controls and features 1. Turn the ignition key to ON. 2. Press the power door unlock control three times. 3. Turn the ignition key from ON to OFF. 4. Press the power door unlock control three times. 5. Turn the ignition back to ON. The horn will chirp. 6. Press the power door unlock control two times, then press the power lock control once. The horn will chirp twice if the memory feature was deactivated or three times (two short and one long) if the memory feature was activated. 7. Turn ignition to OFF. The horn will chirp once to confirm the procedure is complete. Autolock (if equipped) This feature automatically locks all doors when: • all vehicle doors, liftgate and liftgate window are closed • the ignition is in the ON position • you shift into or through R (Reverse) • the brake pedal is released Relock The autolock feature repeats when: • any door is opened and closed • the ignition switch is in the ON position, and • the brake pedal is released Deactivating/activating the autolock feature Before following the procedure, make sure that the ignition is OFF and all vehicle doors and the liftgate window are closed. You must complete steps 1-7 within 30 seconds or the procedure will have to be repeated. If the procedure needs to be repeated, you must wait 30 seconds. 1. Turn the ignition key to ON. 2. Press the power door unlock control three times. 3. Turn the ignition key from ON to OFF. 4. Press the power door unlock control three times. 89