2001 Ford Explorer Sport Trac Owner Guide 6th Printing - Page 91

Controls and features Autolock The autolock feature will lock all of the vehicle doors when: • all doors are closed • ignition key is in the ON position • you shift into or through R (reverse) • the brake pedal is released The autolock feature repeats when: • any door is opened then closed while the engine is running and • you put the vehicle in motion by releasing the brake pedal Deactivating autolock Before following the activation or deactivation procedures, make sure that the ignition is OFF and all vehicle doors are closed. 1. Enter the 5 digit entry code. 2. Press the 7/8 control while holding the 3/4 control. 1 2 3 4 5 6 7 8 9 0 3. Release the 3/4 control then release the 7/8 control. The horn will chirp once if autolock was deactivated or twice (one short and one long chirp) if autolock was activated. To reactivate autolock, repeat steps 1 through 3. Autolock can also be activated or deactivated with the power door lock control using the following procedure: You must complete steps 1 through 5 within 30 seconds or the procedure will have to be repeated. If the procedure needs to be repeated, you must wait 30 seconds. 1. Turn the ignition key from OFF to ON. 2. Press the power door UNLOCK control three times. 3. Turn the ignition key from ON to OFF. 4. Press the power door UNLOCK control three times. 5. Turn the ignition key from OFF to ON. A horn chirp indicates the enable/disable feature is entered. 91