2006 Ford Fusion Owner's Manual - Page 168
2006 Ford Fusion Manual
Page 168 highlights
Driving MANUAL TRANSMISSION OPERATION (IF EQUIPPED) 1 2 3 4 5 R Using the clutch The manual transaxle has a starter interlock that prevents cranking the engine unless the clutch pedal is fully depressed. To start the vehicle: 1. Make sure the parking brake is fully set. 2. Press the clutch pedal to the floor, then put the gearshift lever in the neutral position. 3. Start the engine, then press the brake pedal and release the parking brake. 4. Move the gearshift lever to the desired gear, then slowly release the clutch pedal while slowly pressing on the accelerator. Do not drive with your foot resting on the clutch pedal or use the clutch pedal to hold your vehicle at a standstill while waiting on a hill. These actions will reduce the life of the clutch. Recommended shift speeds Upshift according to the following chart: Recommended upshifts (for best fuel economy) when accelerating 5-speed manual transaxle Shift from: 1-2 14 mph (23 km/h) 2-3 24 mph (39 km/h) 3-4 32 mph (51 km/h) 4-5 44 mph (71 km/h) Reverse 1. Make sure that your vehicle is at a complete stop before you shift into R (Reverse). Failure to do so may damage the transmission. 168 2006 Fusion (fsn) Owners Guide (post-2002-fmt) USA (fus)