2009 Ford Explorer Sport Trac Owner Guide 2nd Printing (Spanish) - Page 484

Driver Controls AWD lock Select this function from the SETUP MENU to display the AWD locked function. 1. Press the SELECT/RESET control for the current display mode. 2. Press and hold the SELECT/RESET control within four seconds to turn the AWD system to the LOCKED mode. 3. Press the SELECT/RESET control switch for the next SETUP MENU item or wait for more than four seconds to return to the INFO MENU. Note: When the AWD system is in the LOCKED mode, the 4X4 indicator will be illuminated. System check Press and hold the SELECT/RESET control switch to select SYSTEM CHECK when "SYSTEM CHECK HOLD RESET" is displayed in the message center. Selecting this function from the SETUP MENU causes the message center to cycle through each of the systems being monitored. For each of the monitored systems, the message center will indicate either an OK message or a warning message for two seconds. Pressing the SELECT/RESET control switch cycles the message center through each of the systems being monitored. The sequence of the system check report and how it appears in the message center is as follows: 1. OIL LIFE 2. CHARGING SYSTEM 3. WASHER FLUID 4. DOOR AJAR 5. EXTERIOR LAMP 6. BRAKE FLUID LEVEL 7. PARK BRAKE 8. MILES TO EMPTY 9. FUEL LEVEL LOW (will only display if 50 miles or less to empty) 87 2009 07+ Explorer Sport Trac (esp) Owners Guide, 2nd Printing USA (fus)