2009 Ford F150 Owner Guide 3rd Printing - Page 105

Driver Controls 1. To disable/enable the power running board feature with the vehicle in P (Park), select this function from the SETUP control for the current display mode. 2. Press the RESET control to select the running boards setting as follows: • AUTO: the running boards will automatically deploy when a door is opened and automatically retract when the door is closed, • OUT: the running boards will remain deployed regardless of the doors being open/closed. This setting can be used when washing the vehicle, or accessing the roof rack. The running boards will stow and enter AUTO mode when the vehicle speed exceeds 5 mph (8 km/h), • OFF: the running boards will remain IN regardless of the doors being open/closed. Autolamp delay This feature keeps your headlights on for up to three minutes after the ignition is switched off. 1. To disable/enable the autolamp delay feature, select this function from the SETUP control for the current display mode. 2. Press the RESET control to select the new Autolamp delay values of >0, >10, >20, >30, >60, >90, >120 or >180. Autolock This feature automatically locks all vehicle doors when the vehicle is shifted into any gear, putting the vehicle in motion. 1. To disable/enable the autolock feature, select this function from the SETUP control for the current display mode. 2. Press the RESET control to turn the autolocks ON or OFF. Autounlock This feature automatically unlocks all vehicle doors when the driver's door is opened within 10 minutes of the ignition being turned off. 105 2009 F-150 (f12) Owners Guide (own2002), 3rd Printing USA (fus)