2009 Ford F150 Owner Guide 3rd Printing - Page 95

Driver Controls RESET FOR SYSTEM CHECK Press and hold the SELECT/RESET stem to get into the system check sequence from the INFO menu for the following items: The message center will cycle through each of the systems being monitored. For each of the monitored systems, the message center will indicate either an OK message or a warning message for two seconds. The sequence of the system check report and how it appears in the message center is as follows: 1. XXX% OIL LIFE 2. CHARGING SYSTEM 3. DOOR STATUS 4. BRAKE FLUID LEVEL 5. XX MILES TO E FUEL LEVEL XXX 6. TBC GAIN = XX.X NO TRAILER (if equipped and no trailer connected) 7. TBC GAIN = XX.X OUTPUT = ////// (if equipped and trailer connected) System warnings System warnings alert you to possible problems or malfunctions in your vehicle's operating systems. In the event of a multiple warning situation, the message center will cycle the display to show all warnings by displaying each one for four seconds. The message center will display the last selected feature if there are no more warning messages. This allows you to use the full functionality of the message center after you acknowledge the warning by pressing the SELECT/RESET stem and clearing the warning message. Warning messages can be divided into three categories: • Cannot be cleared until the condition is corrected. • Reappears 10 minutes after resetting it. • Reappears if the condition clears, then reoccurs within the same ignition on/off cycle. 95 2009 F-150 (f12) Owners Guide (own2002), 3rd Printing USA (fus)