2009 Ford F150 Owner Guide 3rd Printing - Page 298

Driving Note: Do not perform this operation if the rear wheels are slipping. Note: Some noise may be heard as the system shifts or engages; this is normal. Shifting to/from 4L (4X4 Low) 1. Bring the vehicle to a speed of 3 mph (5 km/h) or less. 2. Place the transmission in N (Neutral). 3. Move the transfer case lever through N (Neutral) directly to the desired position. • If the transfer case will not engage into 4L (4X4 Low) do not force the lever. Allow the vehicle to coast at a speed below 3 mph (5 km/h), then repeat Steps 2 and 3. Note: Some noise may be heard as the system shifts or engages; this is normal. Note: For proper operation in 4X4 Low, ensure the transfer case shift lever is moved entirely rearward in to the 4L (4X4 Low) position and that the 4x4 Low light is displayed in the message center. Note: Ideal 4L (4X4 Low) shift conditions occur when the vehicle is rolling at a speed below 3 mph (5 km/h) and the transmission is in N (Neutral). Using the N (Neutral) position The transfer case N (Neutral) position overrides the transmission and puts the vehicle in neutral regardless of transmission gearshift lever position. The vehicle can move forward or backward. This position should only be used when towing the vehicle. WARNING: Do not leave the vehicle unattended with the transfer case in the N (Neutral) position. Always set the parking brake fully and turn off the ignition when leaving the vehicle. 298 2009 F-150 (f12) Owners Guide (own2002), 3rd Printing USA (fus)