2009 Ford Ranger Super Cab Owner Guide 2nd Printing - Page 167

Driving MANUAL TRANSMISSION OPERATION (IF EQUIPPED) 1 2 3 4 5 R Using the clutch Manual transmission vehicles have a starter interlock that prevents cranking the engine unless the clutch pedal is fully depressed. To start the vehicle: 1. Make sure the parking brake is fully set. 2. Press the clutch pedal to the floor, then put the gearshift lever in the neutral position. 1 3 5 3. Start the engine. 4. Press the brake pedal and move the gearshift lever to the desired 2 4 R gear; 1 (First) or R (Reverse). 5. Release the parking brake, then slowly release the clutch pedal while slowly pressing on the accelerator. During each shift, the clutch pedal must be fully depressed to the floor. Make sure the floor mat is properly positioned so it doesn't interfere with the full extension of the clutch pedal. Failure to fully depress the clutch pedal to the floor may cause increased shift efforts, prematurely wear transmission components or damage the transmission. Do not drive with your foot resting on the clutch pedal or use the clutch pedal to hold your vehicle at a standstill while waiting on a hill. These actions will severely reduce the life of the clutch and could nullify a clutch warranty claim. 167 2009 Ranger (ran) Owners Guide, 2nd Printing USA (fus)