2009 Ford Ranger Super Cab Owner Guide 2nd Printing - Page 50

Lights Replacing headlamp bulbs/front park bulbs/turn signal bulbs To remove the bulb(s): 1. Make sure the headlamp switch is in the off position, then open the hood. 2. At the back of the headlamp, pry up the two retainer pins to release the headlamp assembly from the vehicle and pull headlamp forward. 3. Disconnect the electrical connector from the bulb by pulling rearward. 4. Remove the bulb retaining ring by rotating it counterclockwise and slide the ring off the plastic base. 5. Remove the old bulb by pulling it straight out of the lamp. WARNING: Handle a halogen headlamp bulb carefully and keep out of children's reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated. Install the new bulb(s) in reverse order. 50 2009 Ranger (ran) Owners Guide, 2nd Printing USA (fus)