2009 Ford Ranger Super Cab Owner Guide 2nd Printing - Page 62

Driver Controls Activating bed extender Theft Deterrent Device: The following procedure can be done with the bed extender in the stowed or extended position. 1. Locate the Phillips head screw in the middle of the vertical brace in front of the locking clip. 2. Turn the screw counterclockwise until you hear an audible click. 3. To deactivate, turn the screw clockwise until the locking clip moves freely. To remove the bed extender: 1. Extend the bed extender. 2. Pull the lever on each side of the bed extender to unlock it. Make sure the locking clip screws are loose before removing the bed extender. 3. Press the locking clips below the middle bar and lift the bed extender out of the channels on the "D" pillar. To install the bed extender, follow the removal procedure in reverse order. 62 2009 Ranger (ran) Owners Guide, 2nd Printing USA (fus)