2009 Ford Ranger Super Cab Owner Guide 2nd Printing - Page 53

Lights Replacing fog lamp bulbs (if equipped) 1. Make sure the headlamp switch is in the off position and remove the bulb socket from the fog lamp by turning counterclockwise. 2. Disconnect the electrical connector. Install the new bulb in reverse order. Replacing high-mount brakelamp bulb 1. Make sure the headlamp switch is in the off position and remove the two screws and lamp assembly from vehicle. 2. Remove the bulb socket from lamp assembly by rotating it counterclockwise. 3. Carefully pull bulb straight out of socket. Install the new bulb in reverse order. Replacing license plate lamp bulbs 1. Make sure the headlamp switch is in the off position and reach behind the rear bumper to locate the bulb socket. 2. Twist the socket counterclockwise and remove. 3. Carefully pull the bulb straight out of the socket. Install the new bulb(s) in reverse order. 53 2009 Ranger (ran) Owners Guide, 2nd Printing USA (fus)