2011 Ford E250 Cargo Owner Guide 3rd Printing - Page 23

Instrument Cluster Setup menu (vehicle customization and vehicle system check) HOLD RESET FOR SETUP MENU Press and hold the SELECT/RESET stem to get into the setup menu sequence for the following displays: Note: When returning to the setup menu and a non-English language has been selected, HOLD RESET FOR ENGLISH will be displayed to change back to English. Press and hold the SELECT/RESET stem to change back to English. OIL LIFE XXX% HOLD RESET = NEW This displays the remaining oil life. An oil change is required whenever indicated by the message center and according to the recommended maintenance schedule. USE ONLY RECOMMENDED ENGINE OILS. To reset the oil monitoring system to 100% after each oil change, perform the following: 1. Press and release the SELECT/RESET stem to display "OIL LIFE XXX% HOLD RESET = NEW". 2. Press and hold the SELECT/RESET stem for two seconds and release to reset the oil life to 100%. Note: To change oil life 100% value to another value, proceed to Step 3. 3. Once "OIL LIFE SET TO XXX%" is displayed, release and press the SELECT/RESET stem to change the oil life start value. Each release and press will reduce the value by 10%. UNITS ENG / METRIC Displays the current units English or Metric. Press and hold the SELECT/RESET stem to change from English to Metric. Press the SELECT/RESET stem for the next setup menu item or wait for more than four seconds to return to the info menu. AUTOLOCK (if equipped) This feature automatically locks all vehicle doors when the vehicle is shifted into any gear and when the vehicle is in motion over 13 mph (20 km/h) or higher. Press and hold the SELECT/RESET stem to turn this feature on or off. Press the SELECT/RESET stem for the next setup menu item or wait for more than four seconds to return to the info menu. 23 2011 Econoline (eco) Owners Guide, 3rd Printing USA (fus)