2011 Ford E250 Cargo Owner Guide 3rd Printing - Page 26

Instrument Cluster Note: If the SELECT/RESET stem is pressed during the calibration or three minutes has elapsed since the beginning of the calibration without driving the vehicle, the message center reverts back to normal operation and the CAL will display until a successful calibration is carried out. 5. Slowly drive the vehicle in a circle less than 3 mph (5 km/h ) until the CIRCLE SLOWLY TO CALIBRATE message changes to CALIBRATION COMPLETED. LANGUAGE = ENGLISH / SPANISH / FRENCH Allows you to choose which language the message center will display in. Selectable languages are English, Spanish, or French. Waiting four seconds or pressing the RESET button cycles the message center through each of the language choices. Press the RESET button to set the language choice when the language you want appears. Press the SELECT/RESET stem for the next setup menu item or wait for more than four seconds to return to the info menu. HOLD RESET FOR SYSTEM CHECK Press and hold the SELECT/RESET stem to select system check when HOLD RESET FOR SYSTEM CHECK is displayed in the message center. For each of the monitored systems, the message center will indicate either an ok message or a warning message for two seconds. Pressing the SELECT/RESET stem cycles the message center through each of the systems being monitored. The sequence of the system check report and how it appears in the message center is as follows: 1. XXX% OIL LIFE (Gas engine only) 2. ENGINE HOURS 3. ENGINE IDLE HOURS 4. CHARGING SYSTEM 5. BRAKE SYSTEM 6. TBC GAIN = XX.X NO TRAILER (if equipped and no trailer connected) 7. TBC GAIN = XX.X OUTPUT = ////// (if equipped and trailer connected) 8. XX MILES TO E FUEL LEVEL XXX System warnings System warnings alert you to possible problems or malfunctions in your vehicle's operating systems. 26 2011 Econoline (eco) Owners Guide, 3rd Printing USA (fus)