2013 Honda Accord Owner's Manual - Page 145

uu Operating the Switches Around the Steering Wheel u Driving Position Memory System * 2013 Accord Sedan QRG ■ Storing a Position in Memory Memory Button 1 Memory Button 2 1 Storing a Position in Memory After you press the SET button, the storing operation will be canceled when: • You do not press the memory button within five seconds. • You readjust the seat position before the doublebeep. • You set the power mode to any position except ON. 1. Set the power mode to ON. Adjust the driver's seat to the desired position. 2. Press the SET button. uYou will hear a beep, and the memory button indicator light will blink. 3. Press and hold memory button (1 or (2 within five seconds of pressing the SET button. uOnce the seat position has been memorized, the indicator light on the button you pressed stays on. TOC Controls Memory Button 1 Memory Button 2 SET Button ■ Recalling the Stored Position Automatic transmission/CVT models 1 Recalling the Stored Position The seat will stop moving if you: • Press the SET button, or a memory button ( (1 or (2 ). • Adjust the seat position. 1. Move the shift lever to (P . All models 2. Apply the parking brake. 3. Press a memory button ( (1 or (2 ). u You will hear a beep, and the indicator light will blink. The seat will automatically move to the memorized position. When it has finished moving, you will hear a beep, and the indicator light stays on. • • Automatic transmission/CVT models Shift into any position except (P . Manual transmission models Release the parking brake. Index Home 144