2013 Honda Accord Owner's Manual - Page 519

uu Replacing Light Bulbs u Front Turn Signal/Side Marker Light Bulbs QRG Front Turn Signal/Side Marker Light Bulbs When replacing, use the following bulbs. Front Turn Signal/Side Marker Light: 24/2.2 CP (Amber) Holding Clip 2013 Accord Sedan 1 Front Turn Signal/Side Marker Light Bulbs Insert a flat-tip screwdriver, lift and remove the central pin to remove the clip. Central pin Screw 1. Turn the steering wheel all the way to the opposite side from the light being replaced. Passenger side: Turn the steering wheel to the left. Driver side: Turn the steering wheel to the right. 2. Remove the holding clips and screw, and pull the inner fender back. 3. Turn the socket to the left and remove it. 4. Push in the old bulb, rotate to the left until it unlocks, and remove. Insert the clip with the central pin raised, and push until it is flat. TOC Maintenance Bulb Socket 5. Insert a new bulb. Push until the pin is flat. Side Turn Signal/Emergency Indicator Light Bulbs * Door mirrors have the side turn lights. Have an authorized Honda dealer inspect and replace the light bulbs. Index Home 518 * Not available on all models