2013 Honda Accord Owner's Manual - Page 471

uu When Driving u TPMS (Tire Pressure Monitoring System) 2013 Accord Sedan QRG Low Tire Pressure/ TPMS Indicator Models with information display 1 TPMS Calibration TPMS Button Press and hold the TPMS button until the low tire pressure/TPMS indicator blinks twice, indicating the calibration process has begun. • If the low tire pressure/TPMS indicator does not blink, confirm the above conditions then press and hold the TPMS button again. • The calibration process finishes automatically. Models with multi-information display • TPMS cannot be calibrated if a compact spare tire is installed. • The calibration process requires approximately 30 minutes of cumulative driving at speeds between 30-60 mph (48-97 km/h). • During this period, if the ignition is turned on and the vehicle is not moved within 45 seconds, you may notice the low tire pressure indicator comes on briefly. This is normal and indicates that the calibration process is not yet complete. You can calibrate the system using the audio/ information screen. 2 Customized Features P. 299 If the snow chains are installed, remove them before calibrating the TPMS. If the low tire pressure/TPMS indicator comes on even when the properly inflated specified regular tires are installed, have the vehicle checked by a dealer. We recommend that the tires be replaced with the same brand, model, and size as the originals. Ask a dealer for details. TOC Driving You can calibrate the system from the customized features on the multi-information display. 1. Press / 4 button to select Vehicle Settings, then press the SEL/RESET button. u TPMS Calibration appears on the display. 2. Press the SEL/RESET button. u The display switches to the customization setup screen, where you can select Cancel or Calibrate. 3. Press the / 4 button and select Calibrate, then press the SEL/RESET button. u Calibration Started screen appears, then the display returns to the customization menu screen. • If the Calibration Failed to Start message appears, repeat steps 2-3. • The calibration process finishes automatically. Index Home 470