2013 Honda Accord Owner's Manual - Page 77

uu Indicators u 2013 Accord Sedan QRG Indicator Name ● On/Blinking Comes on for a few seconds when you set the power mode to ON, then goes off. Comes on along with a beep when a problem is detected. A system message on the multi-information display appears at the same time. ● Explanation While the indicator is on, press the (information) button to see the message again. Refer to the Indicators information in this chapter when a system message appears on the multi-information display. Take the appropriate action for the message. The multi-information display does not return to the normal screen unless the warning is canceled, or the button is pressed. Does not blink or blinks rapidly - A turn signal light bulb has blown. Change the bulb immediately. 2 Replacing Light Bulbs P. 518, P. 520 Message * ● TOC Instrument Panel ● System Message Indicator * - ● Turn Signal and Hazard Warning Indicators High Beam Indicator Lights On Indicator Index Home ● ● The turn signal indicators blink when you operate the turn signal lever. If you press the hazard warning button, both indicators and all turn signals blink at the same time. Comes on when the high beam headlights are on. Comes on whenever the light switch is on, or in AUTO when the exterior lights are on. ● - ● - ● - ● If you remove the key from the ignition switch*1 while the exterior lights are on, a chime sounds when the driver's door is opened. - 76 *1: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch. * Not available on all models