2013 Honda Accord Owner's Manual - Page 521

uu Replacing Light Bulbs u Brake/Taillight and Rear Turn Signal Light/Rear Side Marker Light Bulbs QRG Brake/Taillight and Rear Turn Signal Light/Rear Side Marker Light Bulbs When replacing, use the following bulbs. Models with LED type brake/taillight 2013 Accord Sedan 1 Brake/Taillight and Rear Turn Signal Light/Rear Side Marker Light Bulbs Models with LED type brake/taillight Brake/Taillight: LED Rear Turn Signal Light: 21 W (Amber) Rear Side Marker Light: LED Models with bulb type brake/taillight Brake/taillight and rear side marker light bulbs are LED type. Have an authorized Honda dealer inspect and replace the light bulbs. When removing the clip, insert a flat-tip screwdriver, then lift and remove the clip. Brake/Taillight/Rear Side Marker Light: 21/5 W Rear Turn Signal Light: 21 W (Amber) Holding Clip 1. Remove the holding clips using a flat-tip screwdriver, then pull the lining back. Clip TOC Maintenance Insert the clip with the pin raised, and push until it is flat. 2. Turn the socket to the left and remove it. Bulb Socket 3. Remove the old bulb and insert a new bulb. Push until the pin is flat. Index Home Bulb * Socket * * Not available on all models 520