2000 Mercedes E-Class Owner's Manual - Page 145

Instruments and controls Audio system Operation Driving Instrument cluster display Practical hints Car care Technical data Index 142 Storing stations Hold the number button down for approximately 2 seconds. The currently displayed frequency is stored on the selected station button. The storage procedure is confirmed by a short signal tone. Retrieving a station from memory Press the desired station button. Direct frequency input (AM and FM only) Scan tuning Press the SC key. Each strong receivable station on the band selected will be tuned in for 8 seconds. The first scan will tune only the stations with a high signal strength. The second scan will tune every receivable station. By pressing either the , , or buttons, or the "SC" key the scan mode can be cancelled. Station memory Ten stations can be stored in the AM and FM bands via the alpha-numeric keypad. The "0" button corresponds to location 10. Weatherband (WB) channels 1 to 7 can be retrieved via the alphanumeric keypad and are preset at the factory. Select the band. Press the " button and enter the desired frequency using the alpha-numeric keypad. Frequencies outside of the frequency ranges (frequencies specified on page 141) will not be accepted. The frequency input mode is cancelled if no button is pressed within 4 seconds.