2000 Mercedes E-Class Owner's Manual - Page 204
2000 Mercedes E-Class Manual
Page 204 highlights
W Winter/Wet (snow and ice) mode Press switch on symbol "W". The vehicle starts out in 2nd gear, except with selector lever in 1st gear, or with accelerator pedal in kick-down position. The "W" mode helps to improve traction and driving stability of the vehicle. The gear shifting process occurs at lower vehicle and engine speeds than in the "S" program mode. Emergency operation (Limp home mode) If vehicle acceleration worsens or the transmission no longer shifts, the transmission is most likely operating in Limp Home Mode which engages when there is a malfunction of the transmission. This condition may be accompanied by the "CHECK ENGINE" malfunction indicator lamp in the instrument cluster coming on. In this mode only the 2nd gear or reverse gear can be activated. To engage 2nd gear or reverse: 1. Stop the vehicle. 2. Move selector lever to position "P". 3. Turn off the engine. 4. Wait approximately 10 seconds. 5. Restart the engine. 6. Move selector lever to position "D" (for 2nd gear), or move selector lever to position "R" (for reverse gear). Have the transmission checked at your authorized Mercedes-Benz Center as soon as possible. Caution! Never change the program mode when the selector lever is out of position "P". It could result in a change of driving characteristics for which you may not be prepared. Important! Always be certain of the program mode selected since the vehicle driving characteristics change with the selection of the program mode. Dependent on the program mode selector switch position "S" or "W" and the gear selector lever in position "R", the ratio of power transmission changes. Automatic transmission Instruments and controls Operation Driving 201 Instrument cluster display Practical hints Car care Technical data Index