1999 Nissan Sentra Owner's Manual - Page 83
1999 Nissan Sentra Manual
Page 83 highlights
For quick cooling when the outside temperature is high, push the button to the ON position. Be sure to return the air recirculation button to the OFF position for normal cooling. Outside air is drawn into the passenger compartment to improve the defogging performance. 2. Move the fan control dial to the desired position. 3. Push on the air conditioner button. The indicator light comes on. 4. Move the temperature control dial to the desired position. perature over the normal range, turn the air conditioner off. See ''If your vehicle overheats'' in the ''In case of emergency'' section of this manual. Dehumidified heating This mode is used to heat and dehumidify the air. 1. Push the button to the off position. po2. Move the air control dial to the sition. AIR FLOW CHARTS The following charts show the button and dial positions for MAXIMUM AND QUICK heating, cooling or defrosting. The air recirculation switch should always be in the OFF position for heating and defrosting. Operating tips ● Keep windows and sunroof closed while the air conditioner is in operation. ● After parking in the sun, drive for two or three minutes with the windows open to vent hot air from the passenger compartment. Then, close the windows. This allows the air conditioner to cool the interior more quickly. ● The air conditioning system should be operated for approximately ten minutes at least once a month. This helps prevent damage to the system due to lack of lubrication. ● If the engine coolant temperature gauge indicates engine coolant tem- 3. Move the fan control dial to the desired position. 4. Push on the air conditioner button. The indicator light comes on. 5. Move the temperature control dial to the desired position. Dehumidified defogging This mode is used to defog the windows and dehumidify the air. 1. Move the air control dial to the sition. ● When the function po- position is selected the automatically cancels. 4-6 Heater, air conditioner and audio systems