2000 Nissan Maxima Owner's Manual - Page 116

TUNE buttons down for more than 0.5 seconds. SEEK/SCAN tuning: SEEK tuning: Push the SEEK/SCAN tuning button or for less than 1.5 seconds. SEEK tuning begins from high to low or low to high frequencies and stops at the next broadcasting station. SCAN tuning: Push the SEEK/SCAN tuning button or for more than 1.5 seconds. SCAN tuning begins from high to low or low to high frequencies and stops at each broadcasting station for 10 seconds. Pushing the button again during this 10 seconds period will stop SCAN tuning and the radio will remain tuned to that station. If the SEEK/SCAN tuning button is not pushed within 10 seconds, SCAN tuning moves to the next station. Station memory operations: Twelve stations can be set for the FM band (six for FM1, six for FM2). Six stations can be set for the AM band. 1. Tune to the desired station using the SEEK/SCAN or TUNE button. 2. Push the desired station select button for more than 1.5 seconds. (For example, in the diagram ch2 is to be memorized. The radio mutes when the select button is pushed.) 3. The indicator ch2 will then come on and the sound will resume. Memorizing is now complete. 4. Other buttons can be set in the same manner. If the battery cable is disconnected, or if the fuse blows, the radio memory will be cancelled. In that case, reset the desired stations. Cassette tape player operation Turn the ignition key to ACC or ON, and then lightly insert the cassette tape into the tape door. The cassette tape will be automatically pulled into the player. SAA0382 The radio or CD will turn off (if it is on) and the cassette tape will begin to play. Heater, air conditioner and audio systems 4-21