2000 Nissan Maxima Owner's Manual - Page 222

INSTALLING FRONT LICENSE PLATE Use the following steps to mount the license plate: Before mounting the license plate, confirm that the following parts are enclosed in the vinyl bag. ¼ License plate bracket ¼ J-nut x 2 ¼ Screw x 2 ¼ Screw grommet x 2 1. Temporarily place the license plate bracket A while aligning points k of the front bumper B fascia with holes k in the license plate bracket. 2. Remove the license plate bracket. A 3. Carefully drill two pilot holes k using a 0.39 in (10 mm) drill bit at the marked locations. (Be sure that the drill only goes through the fascia, or damage to the nut may occur.) 4. Insert grommets into the hole on the fascia. 5. Insert a flat-blade screwdriver into the grommet hole to add 90° turn onto the part k. C STI0191 6. Insert a J-nut into the license plate bracket Technical and consumer information 10-13