2000 Nissan Maxima Owner's Manual - Page 173

AUTOMATIC TRANSMISSION FLUID CAUTION Be careful not to burn yourself, as the engine oil may be hot. 4. Wipe the engine oil filter mounting surface with a clean rag. Be sure to remove any old rubber gasket remaining on the mounting surface of the engine. 5. Coat the rubber gasket on the new filter with clean engine oil. 6. Screw in the oil filter until a slight resistance is felt, then tighten additionally more than 2/3 turn. Oil filter tightening torque: 10.85 to 15.19 ft-lb (14.7 to 20.6 N⋅m) 7. Start the engine and check for leakage around the oil filter. Correct as required. 8. Turn the engine off and wait several minutes. Check the oil level. Add engine oil if necessary. SSD0161 TEMPERATURE CONDITIONS FOR CHECKING ¼ The fluid level should be checked using the HOT range on the dipstick after the following conditions have been met: a) the engine should be warmed up to operating temperature. b) the vehicle should be driven at least 5 minutes. c) the automatic transmission fluid should be warmed to between 122 and 176°F (50 and 80°C). ¼ The fluid can be checked at fluid temperatures of 86 to 122°F (30 to 50°C) using the COLD range on the dipstick after the engine is warmed up and before driving. However, the fluid should be re-checked using the HOT range. 1. Park the vehicle on a level surface and set the parking brake. 2. Start the engine and then move the selector lever through each gear range. Move the selector lever to P (Park) position after you have moved it through all ranges. WARNING ¼ When engine is running, keep hands, jewelry and clothing away from any moving parts such as cooling fan and drive belt. ¼ Automatic transmission fluid is poisonous and should be stored carefully in marked containers out of the reach of children. 8-10 Do-it-yourself