2004 Nissan Xterra Owner's Manual - Page 101
2004 Nissan Xterra Manual
Page 101 highlights
b. When the clamp is loosened, move the crossbars so the cargo can be positioned on the crossbars. c. Tighten the crossbar adjusting screws with the Torxdriver by turning clockwise. d. Secure the cargo with rope. e. Always check the tightness of the crossbar adjusting screws. To remove: a. Loosen the adjusting screws with the Torxdriver by turning counterclockwise. b. Rotate the clamps. c. Remove the crossbars. d. Reverse to install. e. Always check the tightness of the crossbar adjusting screws. If you hear wind noise coming from the roof rack while driving, adjust the roof rack crossbars to the most rearward position. AIC1146 Tubular roof rack crossbar adjustment The front and rear crossbars can be adjusted forward, backward, or be removed. Use the Torxdriver located in the tool kit to loosen both crossbar adjusting screws. To adjust: a. Loosen the adjusting screws with the Torxdriver by turning counterclockwise. Instruments and controls 2-35