2004 Nissan Xterra Owner's Manual - Page 266
2004 Nissan Xterra Manual
Page 266 highlights
INSTALLING FRONT LICENSE PLATE Use the following steps to mount the front license plate: 1. Remove the two screw gromments from the glove box. 2. Carefully drill a hole using a 0.39 inch (10 mm) drill bit at each location mark (small dimple) on the bumper fascia A . 3. Insert one grommet into each hole B . 4. Insert a small screwdriver into the grommet to turn the plastic insert. 5. Install the license plate with two M5 x 25 mm bolts C . VEHICLE LOADING INFORMATION WARNING ● It is extremely dangerous to ride in a cargo area inside a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. ● Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. ● Be sure everyone in your vehicle is in a seat and using a seat belt properly. TERMS It is important to familiarize yourself with the following terms before loading your vehicle: ● Curb Weight (actual weight of your vehicle) - vehicle weight including: standard and optional equipment, fluids, emergency tools, and spare tire assembly. This weight does not include passengers and cargo. WTI0062 ● GVW (Gross Vehicle Weight) - curb weight plus the combined weight of passengers and cargo. ● GVWR (Gross Vehicle Weight Rating) maximum total weight (load) limit specified for the vehicle. 9-12 Technical and consumer information