2008 Nissan Versa Owner's Manual - Page 135

When the position is selected, the air conditioner will automatically turn on. This will dehumidify the air and help to defog the windows. The A/C indicator light will illuminate when the air conditioner automatically turns on. The air conditioner and A/C indicator light will remain on in all flow control modes until the A/C button is pressed or the fan control dial is turned to off. 1. Move the air intake lever to the tion. 2. Turn the air flow control dial to the position. posi- AIR CONDITIONER OPERATION Start the engine, turn the fan control dial to the desired position, and push the button to activate the air conditioner. When the air conditioner is on, cooling and dehumidifying functions are added to the heater operation. The air conditioner cooling function operates only when the engine is running. 3. Turn the fan control dial to the desired position. 4. Turn the temperature control dial to the desired position between the middle and the hot position. When the position is selected, the air conditioner will automatically turn on. This will dehumidify the air and help to defog the windows. The A/C indicator light will illuminate when the air conditioner automatically turns on. The air conditioner and A/C indicator light will remain on in all flow control modes until the A/C button is pressed or the fan control dial is turned to off. Bi-level heating This mode directs cooler air from the side and center vents and warmer air from the floor outlets. When the temperature control dial is moved to the full hot or full cool position, the air between the vents and the floor outlets is the same temperature. 1. Move the air intake lever to position. 2. Turn the air flow control dial to the position. 3. Turn the fan control dial to the desired position. 4. Turn the temperature control dial to the desired position. Cooling This mode is used to cool and dehumidify the air. 1. Move the air intake lever to the tion. 2. Turn the air flow control dial to the position. 3. Turn the fan control dial to the desired position. 4. Push the comes on. button. The indicator light posi- Operating tips Clear snow and ice from the wiper blades and air inlet in front of the windshield. This improves heater operation. 5. Turn the temperature control dial to the desired position. ● For quick cooling when the outside temperature is high, move air intake lever to the position. Be sure to return to the position for normal cooling. Heating and defogging This mode heats the interior and defogs the windshield. Heater, air conditioner, audio and phone systems 4-5