2008 Nissan Versa Owner's Manual - Page 182
2008 Nissan Versa Manual
Page 182 highlights
When the ignition switch cannot be turned to the LOCK position: 1. Shift the selector lever to the P (Park) position. 2. Turn the ignition switch slightly in the ON direction. 3. Turn the ignition switch to the LOCK position. 4. Remove the key if it is inserted in the ignition switch. SSD0437A To lock the steering wheel: 1. Turn the ignition switch to the LOCK position. 2. Remove the key, if it is inserted in the ignition switch. 3. Turn the steering wheel 1/8 of a turn clockwise from the straight up position. To unlock the steering wheel: 1. Insert the key into the ignition switch, if necessary. 2. Gently turn the ignition switch while rotating the steering wheel slightly right and left. With Intelligent Key system If the ignition switch is turned to the LOCK position, the selector lever cannot be moved from the P (Park) position. The shift selector lever can be moved if the ignition switch is in the ON position and the foot brake pedal is depressed. There is an OFF position 1 between the LOCK and ACC positions. The OFF position is indicated by a "1" on the key cylinder. When the ignition is in the OFF position, the steering wheel is not locked. CONTINUOUSLY VARIABLE TRANSMISSION (CVT) The ignition lock is designed so that the ignition switch cannot be turned to the LOCK position until the selector lever is moved to the P (Park) position. When moving the ignition switch to the LOCK position, to remove the key from the ignition switch, make sure the selector lever is in the P (Park) position. 5-8 Starting and driving