2009 Nissan Xterra Owner's Manual - Page 105

HAZARD WARNING FLASHER SWITCH To turn the off road lights off, press the off road lamps switch again. If the high beam function of the headlights is turned off at any time, the off road lights will turn off as well. If the high beam function is turned back on, the off road lamps switch needs to be pressed again with the covers still removed in order to turn on the off road lights. The covers should remain on the off road lights when the lights are not in use. LIC1448 LIC0394 OFF ROAD LAMPS SWITCH (if so equipped) The off road lights are designed to increase visibility when driving during off road conditions. To turn on the off road lights: ● The covers must be removed from the off road lights. ● The headlights must be set to the high beam function. ● Press the off road lamps switch. Push the switch on to warn other drivers when you must stop or park under emergency conditions. All turn signal lights flash. WARNING ● If stopping for an emergency, be sure to move the vehicle well off the road. ● Do not use the hazard warning flashers while moving on the highway unless unusual circumstances force you to drive so slowly that your vehicle might become a hazard to other traffic. ● Turn signals do not work when the hazard warning flasher lights are on. Instruments and controls 2-29