2013 Nissan Xterra Owner's Manual - Page 38
2013 Nissan Xterra Manual
Page 38 highlights
Attaching the center seat belt Always be sure the center seat belt connector tongue and connector buckle are attached. Disconnect only when folding down the rear seat. To connect the buckle: 1 ᭺ 2 ᭺ 3 ᭺ WARNING ● Do not unfasten the rear center seat belt connector except when folding down the rear seat. ● When attaching the rear center seat belt connector, be certain that the seatbacks are completely secured in the latched position and the rear center seat belt connector is completely secured. ● If the rear center seat belt connector and the seatbacks are not secured in the correct position, serious personal injury may result in an accident or sudden stop. Pull out the seat belt tongue from the retractor base. Pull out the connector tongue from the molded retractor base. Pull the seat belt and secure the receiver buckle until it clicks. The center seat belt connector tongue and receiver buckle are indicated by the > and < mark. The center seat belt connector tongue can be attached only into the rear center seat belt connector buckle. To fasten the seat belt, see "Fastening the seat belts" earlier in this section. LRS2086 2nd row center seat belt comfort guide When using the 2nd row center seat belt it may be necessary to use the comfort guide to adjust the shoulder belt height for occupants of different sizes for added comfort and to help obtain proper seat belt fit. 1. Raise the head restraint on the 2nd row driver's side seating position. Remove the comfort guide from the stowed position by pulling the cord from the channel. Safety-Seats, seat belts and supplemental restraint system 1-21