2013 Nissan Xterra Owner's Manual - Page 87

COMPASS AND OUTSIDE TEMPERATURE DISPLAY (if so equipped) This unit has the following functions: ● Measures terrestrial magnetism and indicates heading direction of vehicle ● Indicates outside air temperature With the ignition switch in the ON position, press button as described in the charts bethe low to activate various features of the automatic anti-glare review mirror. Push and hold Feature: (Push button again for about 1 secthe button for about: ond to change settings) Compass/outside temperature dis1 second play toggles on/off Outside temperature display toggles 5 seconds between °C and °F Automatic anti-glare/indicator light 8 seconds toggles on/off Compass zone can be changed to 11 seconds correct false compass readings 13 seconds Compass enters calibration mode ● When the outside temperature is between 140°F (60°C) and 194°F (90°C), the display will read 140°F (60°C). When the temperature is above 194°F (90°C), the display will read "SC". ● When the outside temperature is between -40°F (-40°C) and -60°F (-51°C), the display will read -40°F (-40°C). When the temperature is below -60°F (-51°C), the display will read "OC". ● The outside temperature sensor is located in front of the radiator. The sensor may be affected by road or engine heat, wind direction and other driving conditions. The display may differ from the actual outside temperature or the temperature displayed on various signs or billboards. WIC0904 OUTSIDE TEMPERATURE DISPLAY Push the button for about 1 second when the ignition key is in the ON position to toggle the outside temperature and compass direction dis1 on or off. play ᭺ ● To change from °F to °C, push and hold button for about 5 seconds until the the display begins to flash. Press the button again to toggle between °F and °C. For information about the automatic anti-glare feature, refer to "Automatic anti-glare rearview mirror" in the "Pre-driving checks and adjustments" section. 2-10 Instruments and controls