2014 Nissan Murano Owner's Manual - Page 254

AUTOMATIC OPERATION Cooling and/or dehumidified heating (AUTO) This mode may be used all year round. The system works automatically to control the inside temperature, air flow distribution and fan speed after the preferred temperature is set manually. 1. Push the "AUTO" button on. (The indicator on the button will illuminate and AUTO will be displayed.) SAA2834 Type B 2. Operate the driver side temperature control buttons (type A) or dial (type B) to set the desired temperature. Adjust the temperature to about 758F (248C) for normal operation. . The temperature of the passenger compartment will be maintained automatically. Air flow distribution and fan speed will also be controlled automatically. 3. You can individually set driver and front passenger side temperature using each temperature control buttons (type A) or dial (type B). When the "DUAL" button is pushed or the passenger side temperature control buttons (type A) or dial (type B) is/are operated, the DUAL indicator will come on. To turn off the passenger side temperature control, push the "DUAL" button. 1. 2. 3. 4. 5. 6. 7. 8. 9. "AUTO" automatic air conditioner ON button/ Temperature control dial (driver side) "A/C" air conditioner ON/OFF button " intake air control button " " fan speed control dial/ON/OFF button " " upper vent system button " "DUAL" zone control ON/OFF button/Temperature control dial (passenger side) " front defroster button " " rear window defroster button (See "Rear " window and outside mirror defroster switch" in the "2. Instruments and controls" section.) "MODE" manual air flow control button Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-43